Conformal Coating Machine with Tilt and Rotate

Specifications for SimpleCoat TR Conformal Coating Machine

Tilt and Rotate Conformal Coating Machine Specifications

MACHINE DESCRIPTION MACHINE SPECIFICATION
Capacity Dispense valve Up to 2 valves
Spray valve Tilt ±45•, Rotate ±90•
Motion Control XYZ Axis Drive Stepper motors plus ball screw
XYZ Repeatability 50 µm
Speed 350 mm/sec (13.78″/sec)
Coating Area XYZ Travel with 2 Valves 394 mm x 394 mm x 50 mm (15.5″ x 15.5″ x 2.0″)
XYZ Travel with Spray Valve only without tilt and rotate 457 mm x 394 mm x 50 mm (18″ x 15.5″ x 2.0″)
Bottom Side Clearance 100 mm (4″)
Conveyor Conveyor Type Pin Chain
Conveyor Width (minimum 50 mm (2″)
Conveyor Width (maximum) 394 mm (15.5″)
Edge Clearance 6 mm (0.25″)
Transport Height 940 mm – 965 mm (37″ – 38″)
Communication SMEMA
Facility Requirements Air Supply 6 bar (87 psi) dry, clean air
Included: Quick disconnect for 8 mm hose
Exhaust Port minimum 250 CFM, 127 mm (5″) diameter
Power 100-240 VAC, 50/60 Hz, SIngle Phase, 10 Amp
Operating Control Minimum Requirements Customer-supplied laptop with Ethernet connection and Windows 7 or newer
Footprint (W x D x H) 1000 mm x 1400 mm x 1550 mm (39.37″ x 55.12″ x 61.02″)
Weight (approximate) 275 kg (605 lbs)
Certification CE
Top