TableTop Dispenser - Island Series
Island Series tabletop robots give you versatility to do simple, repetitive automation jobs. Work areas range from 300 mm x 400 mm to 400 mm x 400 mm. All Island Series robots are compatible with our line of precision dispensing pump systems: Precision Auger Pumps and Volumetric PCD Pumps. Who says with going to an entry level robot you need to compromise on dispense quality!
Operation of the robot is done via a teach pendant or computer interface. All programming functions are available in both teach formats so either can be used. The teach pendant is compact and can be placed next to the system without the need for additional tabletop space. A program may be programmed on the computer, then operated by the teach pendant.
Dispense pumps can be fed from either syringe or bulk reservoirs. Depending on the pump selected for the process, syringe sizes can vary from 3 cc to 55 cc. Larger cartridges, such as 20 ounces, can be mounted on the site of the robot and pressure fed to the pump. For high volume applications that require the transfer of fluid from large reservoirs, the necessary ram or pump can be interfaced with the Island Series.
- Easy interfacing with a variety of dispense pumps
- Easy, manual loading and unloading of product
- Easy operator interaction - select a program number and press the start button
- Small footprint
- Simple programming
Island Series tabletop dispenser robots are available in either a stepper or servo configuration. The smallest robot, the Island 2, is available only in stepper configuration.
Choose servo over stepper
Stepper systems need to home before each program execution to be sure that no steps have been lost from the previous program run. Servo systems are closed loop and do not need a home between program runs. Smooth motion is obtained from the servo system.
|Description||Island 3s4||island 4s4|
|Range of Operation (X, Y)||300 mm x 400 mm||400 mm x 400 mm|
|(11.8" x 15.75")||(15.75" x 15.75")|
|Range of Operation (Z)||100 mm (4")|
|Speed (X, Y)||500 mm/sec (20"/sec)|
|Speed (Z)||200 mm/sec (8"/sec)|
|Repeatability (X, Y)||±0.05 mm (±0.002")|
|Repeatability (Z)||0.02 mm (±0.0007")|
|Maximum Product Weight (Table)||11 kg (24 lb)|
|Maximum Tool Weight (Z)||5 kg (11 lb)|
|Pump Capacity||1, Tandem operation available|
|Program Method||Touch screen, PC|
|Operating Control||Touch screen, PC, Front Panel|
|Drive System||Micro Stepping Motor|
|User Input/Output||System I/O: 4/5 User I/O: 16/15|
|Program Capacity||100 programs with 1,000 Steps/Programs|
|Dimensions (W x D x H)||600 mm x 802 mm x 825 mm||700 mm x 802 mm x 825 mm|
|(23.6" x 31.6" x 32.5")||(27.6" x 31.6" x 32.5")|
|Power||110 Volts, 50/60 Hz|
|Weight (approximate)||77 kg (170 lb)||86 kg (190 lb)|