DS Dispense System Specs

Dispense Systems Specs - Equipment, Machines
Dispense Systems Specs - Equipment, Machines
Dispense Systems Specs - Equipment, Machines
Description DS9000 DS9100
Configurations Inline Conveyor System or Stand-alone System
Work Area 18” x 18”
(457 mm x 457 mm)
24” x 24”
(610 mm x 610 mm
Dispense Rate* 28,000 dots per hour (adhesive)
Linear Speed 20 inches/second (508 mm/second)
Positioning Accuracy** ±0.0015” (±0.038 mm)
Repeatability*** ±0.0006” (±0.0152 mm)
Z Axis Travel 3” (76,2 mm)
Resolution (per axis) ±0.0002” (±0.0051 mm)
XYZ Drive Precision Ball Screw Drive with Linear Rails and closed-loop encoder feedback
Valve Stations (maximum) Up to 3 working valve mounts
Footprint – Stand-alone 67” W x 57.5” D x 77” H 73” W x 65.5” D x 77” H
(170 cm W x 146 cm D x 196 cm H) (185 cm W x 166 cm D x 196 cm H)
Footprint – Inline 76” W x 57.5” D x 77” H 86.5” W x 65.5” D x 77” H
(193 cm W x 146 cm D x 196 cm H) (220 cm W x 166 cm D x 196 cm H))
Conveyor Width Adjust 1.5”-18” 1.5”-24”
(38 mm – 457 mm) (38 mm – 610 mm)
Weight (approximate) 1,770 lb (803 kg) 2,250 LB (1021 kg)
Power 110-120 Volts or 220-240 Volts
50-60 Hz
Air Pressure 80-90 psi (552-621 kPa)
Air Flow Rate 4 CFM @ 87 psi (113 l/min @ 600 kPa)
Ventilation Flow Rate 250 CFM (7,079 l/min) through 4” (101,6 mm) diameter exhaust port
*Based on speed test of 1,000 dot pattern at 0.050” (1,27 mm) spacing with certain SMT adhesive materials, at 0.020” (0,508 mm) dot diameter.
**With System Mapping over complete system work area.
***Per axis.