Conformal Coating Dispense System Specifications - Tilt and Rotate

Specifications for SimpleCoat TR model

DESCRIPTION SPECIFICATION
Capacity Dispense valves Up to 2 valves
Motion Control XYZ Axis Drive Stepper motors plus ball screw
XYZ Repeatability 50 µm
Speed 350 mm/sec (13.78"/sec)
Coating Area XYZ Travel with 2 Valves 394 mm x 394 mm x 50 mm (15.5" x 15.5" x 2.0")
XYZ Travel with Spray Valve only without tilt and rotate 457 mm x 394 mm x 50 mm (18" x 15.5" x 2.0")
Bottom Side Clearance 100 mm (4")
Conveyor Conveyor Type Pin Chain
Conveyor Width (minimum 50 mm (2")
Conveyor Width (maximum) 394 mm (15.5")
Edge Clearance 6 mm (0.25")
Transport Height 940 mm - 965 mm (37" - 38")
Communication SMEMA
Facility Requirements Air Supply 6 bar (85 psi) dry, clean air
Exhaust Port minimum 250 CFM, 127 mm (5") diameter
Power 110-220 V AC, 50/60 Hz
Operating Control Minimum Requirements Customer-supplied laptop with Ethernet connection and Windows 7 or newer
Footprint (W x D x H) 1000 mm x 1400 mm x 1550 mm (39.37" x 55.12" x 61.02")
Weight (approximate) 275 kg (605 lbs)
Certification CE